Clay Paky Shotlight Wash 1500
Shotlight Wash is a totally new kind of projector that combines an extraordinary 1500W discharge lamp washlight and a 3000W Xenon lamp strobe in just one device. The two wash/strobe functions are perfectly integrated and can be operator-controlled with either simultaneous or separate operation and special effects. The “strobe” function is provided by two semi-circular Xenon lamps working independently, i.e. they can flash together or separately, at different frequencies.
Washlight section:
- 1500 W Fast-Fit discharge lamp
- Optical unit with extremely high luminous efficiency
- Power may be set to 1500 or 1200 W
- 11°- 74° electronic zoom
- CMY colour system + 2 colour wheels (6+6) + linear “Golden CTO”
- Indexable and rotating ovalizing filter
- “diamond effect” filter
- Frost filter
- 0-100% hybrid dimmer (electronic + mechanical)
- Three-phase pan/tilt motor for perfectly silent operation
- High performance electronics and firmware
- Modular construction for easy maintenance
Strobe section:
- 2 special, curved, pulsed Xenon lamps, 1500 W each Lamp life: 500 hours
- Special shape mirror reflector
- Each lamp is individually operated
- 0-100% intensity control with blinding effect
- Flash rate 0-16 Hz
- Automatic over-temperature safety
- Automatic safety black-out in case of unstable frequency
- Pre-set strobe effects and strobe/wash effects
POWER SUPPLIES
200-240V 50/60Hz
INPUT POWER
Wash: 2000VA at 230 V 50 Hz (PFC electronic ballast)
Strobo: 3000VA
LAMP SOURCE
Wash: 1500W discharge lamp
- Type HTI 1500W/60/P50-L Lok-it Osram
- Cap PGJ50
- Colour temperature 6,000 K
- Luminous flux 135,000 lm
- Average life 750 h
Strobe: pulsed Xenon 1500W lamp (x2)
- Type ER 9902 CPY [H]
- Average life 500 h
OPTICS
Wash:
- Elliptic reflector with high luminous efficiency
- Electronic Zoom 11°-74°
- Diffuser lens (11° to 13°; Linear to 74°)
Strobe:
- Special shape mirror reflector
COLOR SYSTEM
- CMY Color Mixing + linear CTO
- 2 color wheels, each with 6 pure and selected color filters
- CTO and CTB filters on the color wheels
EFFECTS SECTION
wash:
- 1 frost filter
- Indexable beam shaper
- "Diamond Effect" rotating filter
- Hybrid 0-100% dimmer (electronic + mechanical)
- Stop/strobe effect
CONTROL AND PROGRAMMING
Max 29 DMX 512 control channels
DMX protocol signal: USITT DMX 512
Display: Graphic LCD backlit b/w Display
Pan/Tilt Resolution: 16 bit
Dimmer Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 and 5 pole XLR input and output
Software upload through DMX input
BODY
Aluminium structure with die-cast plastic cover.
Two side handles for transportation.
Device locking PAN and TILT mechanisms for transportation and maintenance.
MOVING BODY
Travel:
- PAN = 540°
- TILT = 252°
Maximum speeds:
- PAN = 4.0 sec (360°)
- TILT = 3.2 sec (252°)
Resolution:
- PAN = 2.11°
- PAN FINE = 0.008°
- TILT = 0.98°
- TILT FINE = 0.004°
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit.
ELECTRONICS
Long life self-charging buffer battery.
Pre-set macros.
Function reset from control unit
"ENERGY SAVING" function: with the stop or total dimmer effect on, or with all the CMY filters full (black), consumption cut by 50%.
ON/OFF lamp control from the lighting desk.
Function reset from the lighting desk.
"AUTOTEST" function from menù
ETHERNET Ready.
Electronic monitoring with status error
Cooling system monitoring
DMX level monitoring on all channels
Internal data transmission diagnostics
Firmware Upgrade with no power
Firmware upload from another fixture
SAFETY DEVICES
Bipolar circuit breaker with thermal protection.
Automatic break in power supply in case of overheating.
Forced ventilation with axial fans.
WORKING POSITION
Working in any position.
Hanging system: with fast-lock omega clamps (1/4 turn) on the base
CE MARKING
In conformity with the European Union Low Voltage Directive 2006/95/CE and Electromagnetic compatibility Directive 2004/108/CE.
WEIGHT
46,5 Kg (102 lbs, 5 oz)
